Roof insulation, Nirlat, Aqua Guard, 22 Kg, white

In stock
SKU
601496
Special Price 12,990 Lekë Was 16,500 Lekë
You saved 21% or 3,510 Lekë
Piece (1 Piece)
Share:
Aqua-Guard is a flexible water-based polyurethane coating that prevents water from penetrating through the roof surface in all weather conditions. Used to insulate rooms that are exposed to moisture, as well as balconies (the material is not suitable to be applied to tiles). Aqua-Guard is very resistant to any weather conditions, UV radiation and prevents the accumulation of dust and impurity. Due to its elasticity, the material covers and prevents the appearance of cracks on the surface of the roof (terrace). After drying it creates a thick layer of white polyurethane resistant to water retention, reflecting UV radiation and preventing heating of the building. Surface preparation: Prepare the roof (terrace) thoroughly before application. Remove any sticky paint in a messy way and clean from dirt. Rinse the surface when using the vacuum cleaner. Use a spatula to clean swollen and loose areas. After rinsing, make sure that all the water dries out and no water-covered areas remain. Once dry, fill wide cracks with an acrylic (silicone) filler. Wait another 24 hours for the surface to dry completely. Aqua-Guard can be applied on bitumen layers 30 days after bitumen has been applied. Application: In summer time it is advisable to apply early in the morning before the surface heats up. Apply Aqua-Guard in 2 layers with a total weight of 1.5 Kg per m. The first layer serves as a liner and should be diluted with 30% water. The second layer can be applied without dilution. Spread the material with a roller across the surface, using a brush on the sides and corners. Wait at least 24 hours before the second coat and apply in the same way. Dilution: dilute the first layer with 30% water, the second with 5-10%. Drying time: To repaint: 24 hours. Complete drying: 7 days Gloss level: Mat. Application temperature: 5 -35 degrees Celsius. Color: White, can be colored in pastel shades. Recommended Dispersion Rate *: 1.3 -1.6 Kg / m² * The dispersion rate is calculated according to the work of a skilled worker on a surface with a normal absorption rate and may vary according to the working method, surface area and weather conditions " Cleaning of tools: wash hands and tools with water immediately after use.
Technical specification
  • Dilution: 5-15% water
  • Coverage: 1.3 -1.6 Kg / m²
  • Packing: 22 kg
  • Brand: Nirlat
Write Your Own Review
You're reviewing:Roof insulation, Nirlat, Aqua Guard, 22 Kg, white
Your Rating
Copyright © 2022 MEGATEK // All rights reserved