Acrylic paint, Nirlat, Aquanir, first quality, 5 Lt, Base A, soluble in 10% water and covers 16 m2 / Lt, in 2 coats,

In stock
SKU
601489
2,750 Lekë
Piece (1 Piece)
Share:
Aquanir acrylic paint, 5 Lt, Base A. Elastic acrylic paint with an exceptional coverage, usable inside and out. After painting, a soft velvet layer is obtained, which gives the house wall a pleasant, calm and elegant look. Stable over time and preserves appearance. Nirocryl bears the standard mark Israel 1945. Typical use: for interior and exterior wall painting. Surface preparation: thoroughly clean the surface from impurities such as: lime, dust, previous coatings, grease, etc., before you start painting. Make sure the previous painting is well glued to the wall. Remove the wall coverings well with a trowel and sandpaper. Cleaning: tools and hands should be cleaned with soap and water immediately after use. Coating coat characteristics: color shade: white plus 1500 shades from the nice nirlat catalog. Gloss level: mat. Material data: water-based acrylic mixture and mineral substances. Digestion: with water up to 20% for the first layer. 10% for the second layer. Coverage capacity: 16 m2 per liter in two layers. Viscosity: 98KU ± 10%. Coverage capacity is calculated according to the measurement of the work of an experienced and skilled worker, with varying degrees of acquisition and may vary depending on the working method, surface and climatic conditions. Limitations: do not apply the paint when the temperature is below 7 ° C or when rain is forecast. Drying time. For repainting: 2 hours (in normal weather conditions). To touch: 1 hour. Complete drying: 24 hours.
Technical specification
  • Dilution: 10% water
  • Coverage: 16 m2 / Lt, in 2 coats
  • Packing: 5 L
  • Brand: Nirlat
Write Your Own Review
You're reviewing:Acrylic paint, Nirlat, Aquanir, first quality, 5 Lt, Base A, soluble in 10% water and covers 16 m2 / Lt, in 2 coats,
Your Rating
Copyright © 2022 MEGATEK // All rights reserved