Plastic paint NIroplast 18 L white. A washable matt acrylic paint for interior walls. Particularly indicated for painting gypsum board and gypsum plaster. Also suitable for painting new wall surfaces after a proper surface preparation and application directly on existing paint. The paint has a good opacity and spread rate, is easy to apply and does not yellow. Surface Preparation: thoroughly prepare the surface to obtain good results. Gypsum board: Treat the joints between gypsum boards using Gold Bond Joint Compound and embedding tape, after drying sand to obtain a smooth surface. Remove dust, apply Primer S and wait until dry. Gypsum plaster: sand slightly to obtain a smooth homogeneous surface and clean from dust. Old surfaces: Clean the surface from any foreign matter such as old whitewash, dust, peeling paint, grease etc. Make sure that the existing paint is firmly attached to the surface. Remove unattached paint particles with a scratcher and sand paper. When required, repair the surface with Maximo Crack Filler or Gold Bond, sand and apply Primer S. Application: Roller, brush or sprayer in 2 coats. Dilution: Mix for the first time without dilution. Dilute further with up to 20 % for the first coat and up to 10 % for additional coats. Colour: White. Can be tinted in pastel colours. Coverage: 6 m2/L in 2 coats. Cleaning of hands and tools: With water and soap immediately after use. Dry-time: to-touch: 1 hour; to recoat; 4 hours; final: 24 hours.
Technical specification
Packing: 18 L
Dilution: with water, 10 %
Drying time: To touch: 4 hour. To recoat: 2-3 hours. Full cure: 24 hours.