Varnish for Wood 2.5 L Satin

In stock
SKU
58137
2,700 Lekë
Piece (1 Piece)
Share:
Varnish for Wood 2.5 L satin clear. Clear polyurethane lacquer intendet for painting wooden furniture or renewing wood and wood covering .The lacquer creates a smooth and uniform surface and protects the wood from damage dirt and water. Creates a strong and erosion-resistant coating and intendet for exterior and interior painting. For outdoor use it is advisable to apply the lacquer on top of varied impregnation Primer IMT14. Surface Preparation: Prepare wooden furniture by sanding with sand paper until a smooth and flat surface is obtained. Application: For use on furniture ,wood veneer etc,can be applied directly on the wood in two coats. If o color is desired ,apply a coat of Lazure Protection for Wood in desired shade and ,after waiting 3 hours,apply the polyurethane lacquer ,either matte or glossy.The lacquer is ready for use .can be diluted with 10% mineral turpentine,if necessary.Apply with roller or brush. Coverage : 10m2/l in two coats the coverage capacity is calculated according to the work of a skilled laborer on an infrastructure with an ordinary degrreof absorption and may vary according to the working method,surface and weather conditions. Do not apply the material when the temperature is below 7°C. Dry time to recoat 24 hours(under ordinary wether conditions) To touch:3-4hours full cure :24 hours
Technical specification
  • Drying time: To touch: 3-4 hour. To recoat 24 hour, Full cure: 16-24 hours.
  • Dilution: 10% turpentine
  • Packing: 2.5 L
  • Coverage: 10 m²/L
  • Brand: Nirlat
Write Your Own Review
You're reviewing:Varnish for Wood 2.5 L Satin
Your Rating
Copyright © 2022 MEGATEK // All rights reserved